Sample-based Selection Center
Select Bangjin winding machines by sample, parameters and process
You do not need to confirm the model first. Sample, core size, wire diameter, turns, wire length, downstream process and throughput target can narrow the 14 brochure models into an evaluable range.
BJT08
BJT08 Common-mode Small Ring Dual-wire Winding Machine
Suitable for small common-mode rings with fine-wire dual winding, with high winding efficiency and low defect rate.
1. Product type
2. Sample parameters
3. Process combination
4. Inquiry inputs
Differential-mode winding + soldering
Review core size, wire diameter, wire length and turns before choosing standard winding, high-speed winding or soldering combination.
BJT06
Complete
BJT06 Differential-mode Inductor Winding Machine
Suitable for differential-mode magnetic ring winding, foot forming and cutting.
BJT09
Complete
BJT09 Differential-mode Inductor Flying Wire Machine
Suitable for high-speed differential-mode winding and pairing with the BJT03 soldering machine.
BJT03
Complete
BJT03 Differential-mode Inductor Soldering Machine
Suitable for soldering after differential-mode winding and can be paired with winding machines.
Common-mode winding + foot/threading/soldering
Confirm whether it is a 953-type common-mode coil, then decide foot hanging, board threading or soldering downstream.
BJT12
Complete
BJT12 Common and Differential-mode Inductor Integrated Winding Machine
Used for common and differential-mode winding and as the upstream machine for foot hanging, board threading and soldering combinations.
BJT15
Complete
BJT15 Common and Differential-mode Inductor Foot Hanging Machine
Suitable for foot hanging of common or common-differential coils, improving downstream efficiency and reducing manual work.
BJT13
Complete
BJT13 Common and Differential-mode Inductor Board Threading Machine
Used for board threading and insertion-type downstream processes for common-mode coils.
BJT05
Complete
BJT05 Common-mode Inductor Soldering Machine
Used for downstream soldering of common-mode inductors and can be combined with common-mode winding equipment.
Small ring fine-wire / network transformer
Focus on wire diameter, T1/T2 structure, twisting, pulling, direction recognition and yield target.
BJT08
Complete
BJT08 Common-mode Small Ring Dual-wire Winding Machine
Used for small common-mode magnetic rings, fine wire and dual-wire parallel winding needs.
BJT01
Complete
BJT01 Network Transformer Small Magnetic Ring Winding Machine
Used for small magnetic ring winding and stranding in network transformers.
BJT02
Complete
BJT02 Network Transformer Small Magnetic Ring Winding Machine
Used for automatic T1/T2 small magnetic ring production in network transformers.
Flat wire / large-ring thick wire / sleeving
Focus on wire size, coil outline, wire-damage requirement, sleeve specification and incoming material state.
BJT18
Partial
BJT18 Thick Flat-wire Winding Machine
Used for thick flat-wire coil winding.
BJT17
Partial
BJT17 Thin Flat-wire Winding Machine
Used for thin flat-wire coil winding.
BJT19
Complete
BJT19 Common-mode Large Ring Thick-wire Winding Machine
Used for large magnetic rings and thick-wire common-mode coil winding.
BJT07
Partial
BJT07 Automatic Sleeving Machine
Used for downstream automatic sleeving of ring coils or toroidal inductors.
